Ba a wanzuwa a kan tambayoyin RF_BELEG ba

Babu gamuwa don abu

Don warware matsalar kuskuren NR751 ba a wanzu don abu ba, kawai ƙirƙirar lambar da ake buƙata a cikin yarjejeniyar FBN1 na tsare-tsare: takardar lissafta.

Da zarar an saita adadin lambar yawan dacewa da lambar kamfanin kamfanin a cikin tsarin, yana yiwuwa a ci gaba da sayarwa sayan sayan kayan sayarwa.

Yawancin lokaci mai tsawo ya zama dole don ƙirƙirar sayan sayarwa, wanda yana buƙatar sanin lambar da zai iya amfani da su don ƙirƙirar takardun gaba.

Lambar sako NR751

Lambar sako kuskuren NR751 ba a wanzu ba don abin da RF_BELEG yayi shine:

Binciken asali: kwamfutar da ke cikin layin NRIV yana da kundin ajiyar C, watau saitunan SAP na tsoho ne kawai a cikin abokin ciniki 000.

Dokar: ƙirƙirar lokacin da aka ɓacewa a cikin adanawa.

Lambar kuɗi FBN1.

Ƙirƙirar lamba a SAP

Don ƙirƙirar adadin lambobin da aka ɓace, kawai je zuwa ma'amala FBN1 kewayon kayan aiki na lissafi.

A cikin wannan ma'amala, ƙungiyar ƙungiya ta ƙungiyar ita ce lambar ƙungiyar, wadda za a bayyana maɓuɓɓuka da yawa, kuma wasu daga cikinsu suna da wuyar samun damar ƙirƙirar takardu a cikin tsarin kuma sanya musu lambar ganowa ta musamman.

Danna kan goggle don duba rayukan lambobi na yanzu, a kan alkalami don canza canje-canjen, da kuma a matsayin matsayi don canza halin jeri na yanzu.

Samar da lambar zangon rubutu a SAP

Da zarar a cikin tebur tazarar, ana samun dama da dama tare da saman gumakan da ke sama da tebur: ƙara sabon lambobin lamba, share adadin lambobin da aka kunshi, zaɓi duk jeri na lamba, ko kuma zaɓi dukan teburin.

Har ila yau, yana iya canza saurin da aka samu kawai ta hanyar sabunta shi a teburin.

Ƙara sabon lambar lambar farawa ta danna kan maɓallin dace, don ƙara sabon layin zuwa tebur.

Lambar da shekara suna da matukar muhimmanci, saboda dole ne a ƙayyade lamba don nau'in abu, kuma shekara zata ƙayyade lokacin da za a yi amfani da ƙidayar lambar, ko dai a lokacin shekara ta ba da izinin, ko kuma duk shekaru idan an shigar da shekara 9999 .

Lambar farawa, wanda zai iya zama har zuwa haruffa 20, zai zama lambar farko da aka ba da farko daftarin aiki na irin wannan halitta a lokacin shekarar kalanda da aka zaɓa.

Matsakaicin adadin zai haifar da kuskure lokacin da aka riga an riga an ƙirƙirta lambar da aka riga aka rubuta, kuma an iyakar adadin lambar.

Sabili da haka, zaba abubuwan da kake ciki a sakamakon haka, saboda yana da muhimmanci a iya ƙirƙira dukkan takardu na shekara, kuma kowane ɗayansu na iya samo lambar ta musamman ta hanyar tsarin a cikin lokaci.

SAP takardun lambar range table

Ana ajiye adadin lambobi a cikin layi na NRIV da kewayo, inda aka adana su tare da babban maɓallin lamba da kuma shekara ta kalandar.

Jerin lambobi don nau'in rubutu a SAP

Ana bayyana nau'in takardun aiki a cikin yarjejeniyar OBA7, da T003 da aka dace. Hanyar a cikin SPRO IMG shine lissafi na kudi> lissafi na lissafin kudi na duniya> takardun bayanai> nau'in bayanai> ayyana nau'in takardun shaida don shigarwa.

Ana sanya adadi mai lamba zuwa nau'in takarda, tare da abu RF_BELEG.

Yawan nau'in lambobi da aka sanya ya kamata su kasance daga 01 zuwa 90, dangane da ainihin abu.

Tambayoyi Akai-Akai

Yadda za a ƙirƙiri lambar kayan aiki a cikin SAP?

Don ƙirƙirar kewayon lamba, kawai je daftarin lissafin tabbatarwa na kewayon FBN1. Danna kan tabarau don hango lambar data kasance mai lamba iri-iri, a kan rike don canza tsaka-tsaki, kuma akan maɓallin matsayin don canza matsayin adadin adadin adadin.

Yadda za a magance 'tazara' na tazarar ba don kuskuren abu RF_BEAL 'A SAP?

Wannan kuskuren ana iya warware ta hanyar ƙirƙirar kewayon lambar da ake buƙata a cikin ma'amala FBN1 don tabbatarwa mai nisa.

Gabatarwa zuwa SAP HANA ga Wadanda ba Techies ba a cikin bidiyo